- Features: Supports 1~3 LEDs in series
- Bezel Size: 21MM
- Drive Size: 19MM * 8.5MM
- Working Voltage :5.2-12V (protection voltage 5.5V In dual lithium protection, If you need to use the 3-4 lithium protection please contact Us)
- Temperature protection :55-60 degrees
- Constant current: 5000mAh or 3000mAh
- Modes: 3 Mode (100%High - 30%Mid - 5%Low) or 5 modes 100%-30%-5%-sos-strobe
- Connection: red line conect to the anode and black line connect to the LED cathode,the baffle center connect with the battery anode,and the flashlight case connect with the battery cathode
- Alarm reminder: during normal working, within 5 seconds flashed means high temperature,flash two means no electric and flashes three means high temperature or without electricity,for now,can not change to other modes as the driver was in protecting.
- Note the insulating and cooling, or you will burn the LED or the circuit board.
Include 5pcs circuit board