Note: neutral white
1 .Super bright & latest CREE XML-2 LED, High-Performance, High-Efficiency and energy conservation.
2 .Bead surface ,wide and uniform flood beamshot.
3 .Flat tail cap with strong to to surfaces.
4 .Rugged body with anti-scratching type III hard
5 .Multi-level heat design, excellent heat . Flashlight head construction,
6 .Side button to mode user-friendly to .
7 .Four output levels and Strobe, suitable for different environment.
8 .Wide range provides more choices of batteries. High driver , no
flash in any mode.
9 .Automatic memory function, remember last used setting and can be to output
mode for instant access.
10 .Reverse protection, to protect from battery .
11.Low-voltage function, the light will flash when the battery is low, remind user replace the
battery on time.
12 .Engineered anti-slip for a tightly firm .
13 .Dual springs, better .
14 .Tail stand as a .
15 .Tail hang hole design for use, to prevent dropping.
1. Battery installation & Replace magnet: Insert the battery into the flashlight,the battery
pole toward the light head.
Ensure batteries are inserted correctly,the flashlight will not operate with incorrectly inserted batteries.
Ensure when the light turning on,the beam is directed away from the eyes.
When take the light with Bankcards() or Cell phone,should replaced Magnet with O-ring
2. Flashlight turning on/off: When the flashlight was OFF status:
Press the side switch to level.
Press and hold the side switch 0.5 second,to low mode.
Quickly double press side switch to mode.
When the flashlight was ON(any mode) status:
Press and hold the side switch 0.5 second to turn off.
3. Brightness & mode : Brightness level:
Press side switch to Low-Mid-High-Turbo, cycle.
Quickly double press the side switch to Strobe (10Hz),Press side switch back to previous brightness level.
When the battery voltage drop down,the light will three times every 2 minutes.
LED: CREE XM-L2
Max output: ANSI 820 Lumens
Brightness(NEW): ANSI 820 Lumens(Last for 1 Hour ), High 550 Lumens(Last for 1.75 Hour), Medium 280 lumens(Last for 4 Hour), Low 5 lumens(Last for 120 hour)
Max runtime: 120 hours
Max beam distance: 105 meters
Max beam : 2800cd
Impact : 1.5 Meter
Battery: 1x18650 or 2x CR123A
Rated Range: 3V ~ 9V
Length 110mm / 4.33 inch
Head 25mm / 0.98 inch
Body diameter 22.8mm/0.9inch
Weight: 58g / 2.05oz (without battery)
Accessories: Headband (Detachable with holder ) , clip, lanyard, magnet replace O-ring, Operator’s , Warranty card, Spare O-ring