Can be charged directly on the light, with battery over-discharging protection
Fully charging time: 8-10h;
With gas release valve
Operation voltage: 21V to 16V;
Waterproof: 150 meters underwater
Dimensions: 244.5mm (canister length)* 86mm (dia. Of canister) *
67mm (dia. Of light head);
Weight: 2810 grams (with battery pack)
Underwater Weight: 1050 grams (with battery pack)
Impact resistance: 1.5M
Package includes:(Original Gift Box)
Charger(Fit your country's plug)*1
YS mount *1
1. Plug the charger in the wall power socket, the indicator light is green in the free-load status.
2. Open the top cover of the canister plug the plug of the charger in the ports on the canister. (the positive and negative polar doesn't matter,both ways work.)
3. The indicator light on the charger is red if the battery is not fully charged; it will turn green after fully charged.
4. Take out the charger, put the cover on the canister and use the light.
Successive push the switch ON-OFF within two seconds to cycle through High, Low, strobe, OFF. SCUBA DIVING APPLICATION
Check closely for cuts, scratches, or an otherwise damaged O-ring or mating lens surface as this can cause the light to flood under pressure. Remove any salt deposits, sand, dirt, or other foreign matter from the O-ring sealing surfaces.
KEEP THE THREADS, O-RING GROOVE LUBRICATED WITH SILICONE GREASE.
Please put the switch on the canister to the position of “OFF” during transportation to prevent it from misoperation.
If the switch gets stuck, please put some washing-up liquid in the slot of the switch and push the switch back and forward several times till it move smoothly again, then clean the light in the fresh water.
Please charge the light every time after using. If it isn't used for a long time, please charge the light once every 3 months to prepare for next time using.
Use spaces to separate tags. Use single quotes (') for phrases.