Skilhunt H04RC Magnetic Rechargeable Work Head Lamp Wearable Headband 18650 LED Headlights with Magnet Cap
£49.06
In stock
SKU
M05165
- Buy 3 for £47.97 each and save 2%
- Buy 8 for £46.80 each and save 5%
- Buy 25 for £44.46 each and save 9%
Features:
- Super bright
- L2 LED, max 1200 lumens, high-performance, high-efficiency, and energy conservation
- U.D.O.C reflector
- Increased reflectivity over 10%, excellent structure, and temperature resistance
- Rugged indestructible aluminum body
- Multi-level dissipating heat design, excellent heat dissipation
- Using integrated construction features high thermal conductivity
- Side switch button to transferring mode, user-friendly interface to adjust the output
- Two-mode groups plus editable brightness, more use options for choose
- Wide input range provides more choices of batteries
- High-efficiency driver circuit, no visible flash in any mode
- Automatic memory function
- Remember the last used setting and can be preset to specific output mode for instant access.
- Intelligent temperature control technology for flashlight stable and safe use
- Reverse polarity protection, to protect from improper battery installation
- When turning off, hold press button to activate lockout function, avoid light turn on by unexpected
- When light lockout, location indicator will flash, easily get the light in the dark
- Magnetic tail, can be used on many special occasions, use as candlelight, etc.
Package included:
- 1 x Skilhunt H04 RC LED Flashlight Headlight
- 1 x USB magnetic charging cable
- 1 x Magnet replace rubber pad
- 1 x Operator’s manual
- 1 x Warranty card
- 1 x Spare O-ring
- 1 x Headband
- 1 x Lanyard
- 1 x Clip
Operation:
- Battery installation and replace the magnet
- Insert the battery into the flashlight, the battery positive pole toward the light head
- Ensure batteries are inserted correctly, the flashlight will not operate with incorrectly inserted batteries
- Ensure when the light turning on, the beam is directed away from the eyes
- When taking the light with bankcards (magnetic) or phone, it should replace the magnet with rubber pad.
Turn on/off & modes transfer
- Transfer Mode A / Mode B:
- When the headlight is turned off without lockout, hold press side switch 5 seconds, the light will flash three times faster than flash three times slower
Mode Group A
- When the flashlight was off status: click the switch to memorized brightness level, quickly double click switch to Turbo (T1/T2), quickly triple-click switch to Strobe (S1) mode, press switch 0.5 seconds to Low (L1/L2) mode
- When the flashlight was on (any mode) status: press and hold the side switch 0.5 seconds to turn off
- Brightness and mode selection
- Brightness level: press side switch to Low-Mid-High-Turbo, cycle, quickly double press the side switch to Sub-level (eg, between L1 and L2), turn off memorized the last brightness, quickly triple press to special modes
- Special modes: quickly triple press the side switch to Strobe (S1), then double-click to switch S1/S2/S3 mode, press side switch back to the previous brightness level
Mode Group B
- When the flashlight was off status: click the switch to memorized brightness level, press switch 0.5 sec, to L2, quickly double click switch to Turbo (T1) mode, quickly triple press to Special modes (S1)
- When the flashlight was on (any mode) status: click the switch to turn off
- On commonly used levels (editable): hold press switch, brightness levels automatic cycle, and selected mode by button released, click the switch to turn off, quickly triple press enter to edit levels
- On special modes: quickly double click switch to transfer mode S1/S2/S3, click switch to turn off, hold press side switch 1 second to adjust the S1/S2/S3 brightness output level in Low, medium or high, quickly triple press to restore to the factory default flash modes
Edit Levels:
- Support to 2-7 common used levels can be selected
- Enter to edit level, 7 levels circle automatically
- The selected level, side switch indicator is on
- Not selected brightness, side switch indicator is off
- Factory's default levels: L2-M2-H2-T2 (the indicator light on synchronously when levels automatic cycles)
- Click side switch to turn on/off the corresponding indicator.
- All selected finished, hold press 1 second the side switch save selected and quit edit mode
- The light will be flash three times, and back to the lowest selected level
- Restore the factory default levels: enter to edit level, then click side switch three times (light will be turn off after three clicks)
Location Indicator, Lock-out Function:
- When turning off the flashlight, press switch 1.5 seconds, location indicator switch on and lock-out function activation at the same time, click double click the switch to turn on/off the indicator, the indicator light flashes every second, locate the flashlight, easy to find the flashlight in the dark quickly
- Press switch 1.5 sec, switch unlock and enter into low mode
Power Indicator:
- Every time turn on, the side indicator will be light 5 seconds to display the battery power
- Blink four times: battery power in 100%-80%
- Blink three times: battery power in 80%-50%
- Blink twice: battery power in 50%-20%
- Blink one time: battery power below 20%
Usage And Maintenance:
- Use quality batteries so as not to damage the light due to leaks or other self-destructive possibilities
- Remove batteries when the light will not be used for an extended period or if batteries are discharged
- When using Li-ion batteries, we recommend the use of protected batteries, clean contacts, threads and O-rings of the flashlight with a clean cloth from time to time when necessary
- Should flicker or doesn't light up this the most likely cause
- If the flashlight is used in a wet environment, lubricate O-rings frequently to maintain watertight seal inspected and cleaned if necessary
Write Your Own Review