ARCHON (Austrian pupil) D26VR Diving Light is a portable diving photography lights. The lights can be one-handed operation, easy to carry, with a professional photography white LED, red LED, can be more truly illuminate the original color of underwater objects, so divers can shoot photographic effects you want. The lamp professionalism and diversity, making it ideal for technical diving equipment and recreational diving.
The portable diving photography lights, selected US imports LED wick
PWM constant current drive circuit signal processing +
Professional micro-computer chip with low power and low battery indication protection
Unique electronic anti-anti-loaded design, even if the battery is not installed by mistake will cause damage to the torch
Aerospace aluminum material, shell III hard anodized treatment can prevent seawater corrosion
The light source: 8 * CREE XP-G2 R5 (color temperature of 5000K-5500K) + 2 * CREE XP-E N3 (wavelength 620 nm)
Maximum brightness: white (fill light): 2000 lumens; red light: 200 lumens
Beam Angle: 110 degrees photography fill light
Operating voltage: 4.5-2.8 V
Lamp Size: head diameter 50 mm, body diameter 30 mm, overall length 150 mm
Lens Size: 5 mm (tempered glass)
Battery Type: 26650 * 1 (lithium battery)
Life time: 90 minutes Highlight file, the file 150 minutes light, red file 180 minutes
Light body weight: 224 g (without battery)
Water Weight: 135 grams (with battery)
Land Weight: 314 grams (with battery)
Water resistance: 100 meters
D26VR Light x 1
Ball Arm x 1
26650 Battery x 1
Charger(Fit your country's plug) x 1
Silicone rope x 1
Instructions x 1
Oring x 2
Instructions for use:
1. Battery installation: 1) tail lights up, remove the tail lights cover counterclockwise rotation. 2) in accordance with the direction of the positive and negative battery replacement sticker. 3) clockwise to install the tail lamp cover.
2. Switch Function: Switch Function: 1) When adjusting aura arrow points to OFF (lights off) when it is rotated counterclockwise so that the arrow points to ON to turn the flashlight (the default file is highlighted); then rotated clockwise so that the arrow counterclockwise adjusted again within 1 second after the lights ON to OFF switch to the light. Repeat to complete the cycle highlighted - turn off the light - the light - turn off the light mode. 2) When the light is off, rotated clockwise so that the arrow points to "R" symbol, namely, the achievement red gear; counter-clockwise so that the arrow points to OFF and then turn off the lights.
3. Low battery indication and protection: the battery drops below 10%, the lights flash 3 tips under 5 seconds and then flash 3, the light enters a low state; electricity to 5%, the automatic shutdown protection (to prevent lithium battery over-discharge).
4. Charging Instructions: 1) the charger plugged into the charging stand. No battery charging slot when the indicator shows green. 2) Replace the battery on the charging slot, the charger indicator is red indicates that the battery is not fully charged, the green indicates that the battery is fully charged. 3) After charging is completed, remove the batteries properly stored.
Use spaces to separate tags. Use single quotes (') for phrases.